HP XP7 Storage - Manual (Page 74)

1. In the RWC main window, in the resource tree in the Explorer, click Replication > Local
Replication > FS Pairs.
2. In the FS Pairs tab, select the pair you want to split and then click Split Pairs.
3. In the Split Pairs window of the Split Pairs wizard, complete the following and then click Finish:
•
For Split Type, select the mode in which you want to split the selected pairs.
Values:
- Quick Split: The pair is split and then the differential data is copied to the S-VOL in the
background. Specify this value when you want to write to or read from the S-VOL
immediately after splitting a pair.
- Steady Split: The differential data is copied to the S-VOL and then the pair is split.
Note: This value is only available if you specify the copy type as FS.
Default: Steady Split
•
For Copy Pace, the speed at which the S-VOL is copied is shown.
For FS pairs, a hyphen (-) is displayed.
74 Managing Fast Snap Pairs