HP XP7 Storage - Manual (Page 54)

•
(Optional) Confirm the LDEV SSID you generated.
For more information about confirming LDEV SSIDs, see “Confirming generated LDEV
SSIDs” (page 49) .
•
For Cache Partition, select CLPR.
Required: No
•
MP Blade,
Complete one of the following:
- To assign a specific MP blade that the LDEV will use, select the MP blade ID.
- To assign an auto-generated MP blade, click Auto.
Required: No
The created LDEVs are added to the Selected LDEVs table.
5. Click Finish.
NOTE: To continue setting the LU path and define LUN, click Next.
For more information about setting the LU path, see the HP XP7 Provisioning for Open Systems
User Guide.
6. (Optional) Change the settings of the V-VOLs. You can complete the following:
•
To select a storage system identifier and edit the SSID properties, click Edit SSIDs.
Edit the SSIDs (see “Editing the SSID for virtual volumes” (page 42) ).
•
To change the LDEV setting, click Change LDEV Settings.
Change the LDEV settings (see “Changing LDEV settings” (page 44) ).
54 Configuring Fast Snap