HP XP7 Storage - Manual (Page 128)

1. For Pool Name, type the new pool name.
- For Prefix, type the alphanumeric characters that precede the pool number.
Case-sensitive: Yes
- For Initial Number, type the pool’s initial number.
Digit Limit: 9
Character limit: 32
2. Click Finish.
5. In the Confirm window of the Edit Pools wizard, complete the following and then click Apply:
•
For Task Name, type the name for the task.
Character and symbol limit: 32
Allowable characters and symbols: All alphanumeric except \ / : , ; * ? " < > |
Default: date-task name
•
For Go to tasks window for status, select to open the task window.
Default: Selected
The pool name is changed.
Recovering blocked pools
CAUTION: Recover blocked pools for disaster recovery purpose only.
NOTE: The pool recovery time depends on pool or V-VOL usage and system workload. Calculate
roughly 20 minutes of recovery time for every 100 TB of pool or V-VOL usage.
Prerequisite: You are currently not decreasing the pool capacity.
128 Monitoring and maintaining Fast Snap