HP XP7 Storage - Manual (Page 169)

Description Item
Values:
•
BC-L1: BC L1 pair
• BC-L2: BC L2 pair
•
BC Z: BC Z pair
The FS snapshot group name. Snapshot Group
If you have not configured a snapshot group for the FS pair, this item is blank.
The pair status. Status
For more information about FS pair status, see “Fast Snap pair status definitions”
(page 97) .
The rate at which the current FS S-VOL matches the next new generation of the
S-VOL. If the S-VOL is the latest one, the storage system computes the synchronous
rate by comparing the S-VOL with the P-VOL. Synchronous Rate (%)
The S-VOL information. Secondary Volume
Values:
• LDEV ID: The S-VOL's LDEV identification number.
•
LDEV Name: The S-VOL's LDEV name.
•
CLPR: The S-VOL's CLPR number.
• Virtual Storage Machine: The model type and serial number of the virtual
storage machine to which the S-VOL belongs.
•
Virtual LDEV ID: The identification number of the S-VOL’s virtual LDEV. If no
virtual LDEV ID is assigned, a blank displays.
• Virtual Device Name: The name of the S-VOL’s virtual device, in a combined
format of “virtual emulation type”, “number of virtual LUSE volumes”, and
“virtual CVS attribute”. Each of these three items displays only if it is specified.
If none of them are specified, a blank displays.
•
Virtual SSID: The virtual SSID of the S-VOL. If no virtual SSID is specified, a
blank displays.
The mirror unit number. Mirror Unit
Click to update the information in this table. Refresh button
View Pair Properties window
Use this window to monitor pair properties and to confirm the status of a volume.
The following image shows the View Pair Properties window.
View Pair Properties window 169