HP Officejet t45xi All-in-One Printer - Manual (Page 9)

Polaris (US)
.........................................................................................................................................
1-5
HP Company Confidential - 3/18/99 1:56 pm
1
Loading specialty paper
To load specialty paper, remove the plain paper, place the specialty
paper on top, then return the entire stack to the paper tray.
● Load letterhead paper face down with the top of the page going
into the paper tray first.
● Load transparencies (up to 50) with the adhesive strip on top and
going into the paper tray first.
● Load photo paper with the glossy side down.
Loading a single envelope
● To print a single envelope, use the single-envelope
slot in the output tray so you don’t have to remove
the paper from the paper tray.
● Slide the envelope into the slot until it stops, with
the flap up and to the left.
Loading multiple envelopes
Pull the paper tray out and remove any paper.
Load a stack of up to ten envelopes with the flap
up and to the left. Place the stack against the right
edge of the paper tray and all the way forward.
Note: Be sure to set the paper size for envelopes
(see the dialog box on page 2-10).
Slide the envelope length and width adjusters in
until they stop at the edges of the envelopes.
Slide the paper tray back in all the way.
Tip:
1
2
3
4