HP SAN Virtualization Services Platform User Manual
HP Storage
Advertising
HP StorageWorks SAN Virtualization Services
Platform Data Path Module User Guide
This guide provides information about accessing and using the graphical user interface (GUI) and the command
line interface (CLI) of the HP StorageWorks SAN Virtualization Services Platform (SVSP) Data Path Module
(DPM).
Part Number: 5697–0772
Fourth edition: November 2010
Advertising
Table of contents
Document Outline
- HP StorageWorks SAN Virtualization Services Platform Data Path Module User Guide
- Contents
- 1 Data Path Module management interface options
- 2 Using the command line interface
- 3 CLI commands
- Activate command
- Add license command
- Add syslog command
- Clear command
- Create debug command
- Create snmp command
- Create user command
- Delete config command
- Delete license command
- Delete snmp command
- Delete syslog command
- Delete user command
- Disable eth command
- Disable ftp command
- Disable http command
- Disable insecure command (oboslete)
- Disable ntp command
- Disable port command
- Disable secure command (obsolete)
- Disable snmp command
- Disable ssh command
- Disable syslog command
- Disable telnet command
- Disable user command
- Enable bootset command
- Enable eth command
- Enable ftp command
- Enable http command
- Enable insecure command (obsolete)
- Enable ntp command
- Enable port command
- Enable secure command (obsolete)
- Enable snmp command
- Enable ssh command
- Enable syslog command
- Enable telnet command
- Enable user command
- Exit command
- Help command
- Help commands
- Install image command
- Load config command
- Load debug command
- Load factory command
- Modify chassis command
- Modify date command
- Modify eth command
- Modify factory command
- Modify ntp command
- Modify port command
- Modify ports command
- Modify san command
- Modify snmp command
- Modify therm command
- Modify timezone command
- Modify user command
- Quit command
- Reboot command
- Remove image command
- Rescan command
- Reset debug command
- Reset port command
- Restart ntp command
- Restart snmp command
- Restart ssh command
- Save config command
- Save debug command
- Set debug command
- Set eth command
- Show bootset command
- Show bootsets command
- Show chassis command
- Show configs command
- Show copyright command
- Show date command
- Show debug command
- Show eth command
- Show eths command
- Show events command
- Show factory command
- Show fan command
- Show fans command
- Show ftp command
- Show group command
- Show groups command
- Show http command
- Show ID command
- Show image command
- Show images command
- Show license command
- Show log command
- Show ntp command
- Show port command
- Show ports command
- Show ps command
- Show pss command
- Show rport command
- Show security command
- Show snmp command
- Show ssh command
- Show status command
- Show syslog command
- Show telnet command
- Show therm command
- Show therms command
- Show timezone command
- Show user command
- Show users command
- Show version command
- Show version_number command
- Show voltage command
- Show voltages command
- Shutdown command
- Version command
- Watch debug command
- Watch log command
- 4 Using the Data Path Module management GUI
- 5 Support and other resources
- Glossary