HP SAN Virtualization Services Platform - Manual (Page 29)

Syntax
enable insecure [permission]
Keyword values
[permission]
Either read, write, or all.
See also
“ Disable insecure command ” on page 23
“ Show security command ” on page 62
Enable ntp
command
Enables use of the ntp protocol on the DPM.
Syntax
enable ntp
See also
“ Disable ntp command ” on page 24
“ Modify ntp command ” on page 38
“ Restart ntp command ” on page 45
“ Show ntp command ” on page 59
Enable port
command
Enables the specified Fibre Channel port number so that it can send and receive Fibre Channel traffic.
Syntax
enable port
[port number]
*
Keyword values
port number
Port number is an integer 0–15 to indicate the DPM Fibre Channel port to be enabled.
* indicates all Fibre Channel ports.
See also
“ Disable port command ” on page 24
HP StorageWorks SAN Virtualization Services Platform Data Path Module User Guide 29