HP SAN Virtualization Services Platform - Manual (Page 30)

“ Modify ports command ” on page 39
“ Modify ports command ” on page 39
“ Show port command ” on page 59
“ Show ports command ” on page 60
Enable secure
command (obsolete)
NOTE:
This command is obsolete and has been removed from the current version of the CLI.
Enables permissions on SSL-encrypted transmissions.
Syntax
enable secure [permission]
Keyword values
[permission]
Either read, write, or all.
See also
“ Disable secure command ” on page 25
“ Show security command ” on page 62
Enable snmp
command
Enables the specified Simple Network Management Protocol component. By default, the system runs
SNMP version 2. Enabling SNMP v3 means that SNMP v3 is turned on but does not affect SNMP
v2.
Syntax
enable snmp [component]
Keyword values
[component]
The states of v2, v3, or daemon. Enabling the daemon enables SNMP.
See also
“ Create snmp command ” on page 19
“ Delete snmp command ” on page 21
“ Disable snmp command ” on page 25
CLI commands 30