HP SAN Virtualization Services Platform - Manual (Page 66)

“ Enable user command ” on page 32
“ Modify user command ” on page 42
“ Show groups command ” on page 57
“ Show user command ” on page 65
Show version
command
Shows the firmware version number.
Syntax
show version
Show version_number
command
Shows the firmware version number.
Syntax
show version_number
Show voltage
command
Returns the nominal and actual voltages for the DPM. The nominal voltage is the expected voltage
when everything is operating correctly. The actual voltage is the current voltage.
Syntax
show voltage
[voltage number]
*
Keyword values
voltage number
An integer between 1 and 15 inclusive, that is the location in the DPM circuitry where the voltage is
measured. Used by support personnel as a diagnostic tool.
* indicates all voltages in the DPM.
See also
“ Show voltages command ” on page 66
Show voltages
command
Returns the nominal and actual voltages for the DPM. The nominal voltage is the expected voltage
when everything is operating correctly. The actual voltage is the current voltage.
CLI commands 66