HP SAN Virtualization Services Platform - Manual (Page 63)

See also
“ Create snmp command ” on page 19
“ Disable snmp command ” on page 25
“ Enable snmp command ” on page 30
“ Modify snmp command ” on page 40
Show ssh
command
Indicates whether or not ssh is enabled or disabled.
Syntax
show ssh
See also
“ Disable ssh command ” on page 26
“ Enable ssh command ” on page 31
“ Restart ssh command ” on page 45
Show status
command
Returns the current status of all power supplies, fans, thermometers, and voltages for the DPM, and
reports errors where detected.
Syntax
show status
Show syslog
command
Returns the port number, socket protocol, name, and IP address of each remote logging server. Lines
marked with an asterisk are disabled.
Syntax
show syslog
See also
“ Add syslog command ” on page 17
“ Add syslog command ” on page 21
“ Disable syslog command ” on page 26
“ Enable syslog command ” on page 31
HP StorageWorks SAN Virtualization Services Platform Data Path Module User Guide 63