HP SAN Virtualization Services Platform - Manual (Page 47)

Keyword values
[module name]
Kernel module where the debug values will be set.
[level value]
New level to be set.
[type-list]
Comma-separated list of types to be set.
Examples
show debug modules fcpt
returns:
fctp=err (newcmd,iocomp,tmf,abts,puntrsp,quefull,rsp,dump)
set debug fcpt level warning sets the fctp module level value to warning.
show debug modules fcpt would now show:
fctp=warning (newcmd,iocomp,tmf,abts,puntrsp,quefull,rsp,dump)
set debug fcpt type tmf,dump level crit sets the types tmf and dump in fcpt to have
debug levels of crit.
show debug modules fcpt would now show:
fctp=warning/tmf,dump=crit (newcmd,iocomp,abts,puntrsp,quefull,rsp)
set debug fcpt level info
sets the fsct module level value to info.
show debug modules fcpt
would now show:
fctp=info/tmf,dump=crit (newcmd,iocomp,abts,puntrsp,quefull,rsp)
reset debug level fcpt resets the fcpt debug levels to the original values.
show debug modules fcpt would now show:
fctp=err (newcmd,iocomp,abts,puntrsp,quefull,rsp,dump)
See also
“ Create debug command ” on page 18
“ Load debug command ” on page 34
“ Reset debug command ” on page 43
“ Save debug command ” on page 46
“ Show debug command ” on page 51
“ Watch debug command ” on page 67
Set eth
command
Changes the Ethernet family address resolution method, duplex, and link speed for the specified
Ethernet interface.
HP StorageWorks SAN Virtualization Services Platform Data Path Module User Guide 47