HP SAN Virtualization Services Platform - Manual (Page 37)

IPv4, IPv6
address [IP address]
IP address of the interface.
gateway [gateway address]
IP address of the network gateway.
netmask [subnet mask]
Mask bits for subnet routing.
Notes
If you are connected through the management port, modifying the MGMT Ethernet terminates any
active network GUI and CLI sessions, requiring a re-login through the serial or MGMT port. If you are
using the CLI on the serial console, the connection is not disrupted.
See also
“ Disable eth command ” on page 22
“ Enable eth command ” on page 27
“ Set eth command ” on page 47
“ Show eth command ” on page 54
“ Show eths command ” on page 55
Modify factory
command
Restore the factory rank or the factory WWNN value.
Syntax
modify factory rank [rank-value]
modify factory wwnn [wwnn-value]
Keyword values
At least one of the optional keywords is required:
[rank-value]
New rank value (Primary or Secondary).
[wwnn-value]
New WWNN to set.
See also
“ Load factory command ” on page 35
“ Show factory command ” on page 55
HP StorageWorks SAN Virtualization Services Platform Data Path Module User Guide 37