HP SAN Virtualization Services Platform - Manual (Page 56)

Syntax
show fan
[fan number]
*
Keyword values
[fan number]
An integer between 1 through 10, inclusive.
* indicates all fans.
Notes
If the fan is a power supply fan, the RPM is not available. The RPM displays as 0 if the fan is not
operational; as 1 if the fan is operational.
See also
“ Show fans command ” on page 56
Show fans
command
Displays the fan location, the status (either OK or Error), and the RPM for all fans in the DPM.
Syntax
show fans
Notes
If the fan is a power supply fan (Fan 1 and Fan 3), the RPM is not available. The RPM displays as 0
if the fan is not operational; as 1 if the fan is operational.
See also
“ Show fan command ” on page 55
Show ftp
command
Indicates whether or not FTP is enabled or disabled.
Syntax
show ftp
See also
“ Disable ftp command ” on page 23
“ Enable ftp command ” on page 28
CLI commands 56