Modify ntp command, Modify port command, 38 modify port command – HP SAN Virtualization Services Platform User Manual
Page 38
Modify ntp
command
Change the NTP server.
Syntax
modify ntp server [server-name]
Keyword values
[server-name]
New server to be used to get the time.
See also
Modify port
command
Changes the specified options—type, capability, speed—for the specified Fibre Channel port number.
Syntax
modify port [port number]
capability [port capability]
speed [port speed]
type [port type]
Keyword values
At least one of the optional keywords is required:
[port number]
An integer 0–15 to indicate the DPM Fibre Channel port.
capability [port capability]
FCP_TARGET:
to enable the port to be used as a front-end (looks like a storage array port to
servers).
FCP_INITIATOR:
to initiate back-end traffic to the supported storage arrays (is not available
to servers).
both:
traffic can go both ways.
speed [port speed]
1G, 2G, 4G, NEGOTIATE
CLI commands
38