HP SAN Virtualization Services Platform - Manual (Page 27)

Syntax
disable user [user name]
Keyword values
[user name]
Name of the user account that you are disabling.
See also
“ Create user command ” on page 19
“ Delete user command ” on page 22
“ Enable user command ” on page 32
“ Modify user command ” on page 42
“ Show user command ” on page 65
“ Show users command ” on page 65
Enable bootset
command
Set the active bootset.
Syntax
enable bootset [number]
Keyword values
[number]
The number 1 or 2.
Notes
Since there are only two bootsets, enabling one bootset effectively disables the other. Therefore, there
is no “disable bootset” command.
See also
“ Show bootset command ” on page 48
“ Show bootsets command ” on page 49
Enable eth
command
The DPM includes four Ethernet interfaces: MGMT, GE1, GE2, and GE3. This command enables the
specific Ethernet interface so that it can send or receive network traffic.
Syntax
enable eth [interface name]
HP StorageWorks SAN Virtualization Services Platform Data Path Module User Guide 27