HP SAN Virtualization Services Platform - Manual (Page 54)

Notes
As this command returns a large amount of information to the screen, turn on logging in your terminal
program so that you can capture all the information in a file to send to HP.
Examples
show debug modules cssdev
will return a line that looks like:
cssdev=err (ucmd) which indicates that the kernel module cssdev has a debug level set
to err. There is one extra type ucmd that can have different debug level set in cssdev. Show
debug sac initiators
will display initiator information from the sac.
See also
“ Create debug command ” on page 18
“ Load debug command ” on page 34
“ Reset debug command ” on page 43
“ Save debug command ” on page 46
“ Set debug command ” on page 46
“ Watch debug command ” on page 67
Show eth
command
Returns the configuration—IP address, subnet mask, and gateway—for the specified Ethernet interface.
Syntax
show eth [interface]
Keyword values
[interface]
Ethernet interface that you are showing: MGMT, GE1, GE2, or GE3
family
IPv4, IPv6
See also
“ Disable eth command ” on page 22
“ Enable eth command ” on page 27
“ Modify eth command ” on page 36
“ Set eth command ” on page 47
“ Show eths command ” on page 55
CLI commands 54