HP Officejet J3680 All-in-One Printer - Manual (Page 159)

To remove the control-panel faceplate
1. Press the Power button to turn off the device.
2. Unplug the power cord, and then disconnect it from the device. Do not return the power cord
with the device.
3. Remove the control-panel faceplate as follows:
a. Lift the ADF lid.
b. Use either your finger or insert a thin object in the tab on the upper right corner of the control-
panel faceplate to pry the control-panel faceplate off.
4. Retain the control-panel faceplate. Do not return the control-panel faceplate with the device.
CAUTION: The replacement device might not come with a control-panel faceplate. Store
your control-panel faceplate in a safe place, and when the replacement device arrives,
reattach your control-panel faceplate. You must attach your control-panel faceplate to use
the control-panel functions on the replacement device.
NOTE: See the setup poster that came with the device for instructions on how to attach
your control-panel faceplate. The replacement device might come with instructions for
setting up your device.
Pack the device
Complete the following steps after you have prepared the device for shipment.
Pack the device 155