HP Officejet J3680 All-in-One Printer - Manual (Page 25)

To load an original in the document feeder tray
1. Load your original, with the print side down, into the document feeder tray. Place the
pages so that the top edge of the document goes in first. Slide the media into the
automatic document feeder until you hear a beep or see a message on the display
indicating that the loaded pages were detected.
TIP: For more help on loading originals in the automatic document feeder, refer
to the diagram engraved in the document feeder tray.
2. Slide the width guides inward until they stop at the left and right edges of the media.
Select print media
The device is designed to work well with most types of office media. It is best to test a
variety of print media types before buying large quantities. Use HP media for optimum
print quality. Visit the HP Web site at
www.hp.com for more information about HP media.
Tips for selecting and using print media
For the best results, observe the following guidelines.
•
Always use media that conforms to the device specifications. For more information,
see
Understand specifications for supported media .
• Load only one type of media at a time into a tray.
• Load media print-side down and aligned against the right and back edges of the tray.
For more information, see
Load media .
• Do not overload the tray. For more information, see Understand specifications for
supported media .
• To prevent jams, poor print quality, and other printing problems, avoid the following
media:
•
Multipart forms
• Media that is damaged, curled, or wrinkled
• Media with cutouts or perforations
• Media that is heavily textured, embossed, or does not accept ink well
• Media that is too lightweight or stretches easily
Select print media 21