Send a fax, Send a basic fax, 6 fax – HP Officejet J3680 All-in-One Printer User Manual

Page 51: Send a fax in error correction mode, 6fax

Advertising

Fax

You can use the device to send and receive faxes, including color faxes. You can
schedule faxes to be sent at a later time and set up speed-dials to send faxes quickly and
easily to frequently used numbers. From the control panel, you can also set a number of
fax options, such as resolution and the contrast between lightness and darkness on the
faxes you send.
If the device is directly connected to a computer, you can use the HP photo and imaging
software to perform fax procedures that are not available from the control panel. For more
information, see

Use the HP photo and imaging software

NOTE:

Before you begin faxing, make sure you have set up the device properly for

faxing. You might have already done this as part of the initial setup, by using either
the control panel or the software that came with the device. You can verify the fax is
set up correctly by running the fax setup test from the control panel. To run the fax
test, press Setup, select Tools, select Run fax test, and then press OK.

This section contains the following topics:

•

Send a fax

•

Receive a fax

•

Change fax settings

•

Fax over the Internet

•

Test fax setup

•

Use reports

•

Cancel a fax

Send a fax

You can send a fax in a variety of ways. Using the control panel, you can send a black-
and-white or color fax. You can also send a fax manually from an attached phone. This
allows you to speak with the recipient before sending the fax.

•

Send a basic fax

•

Send a fax manually from a phone

•

Send a fax using monitor dialing

•

Send a fax from memory

•

Schedule a fax to send later

•

Send a fax to multiple recipients