HP Officejet J3680 All-in-One Printer - Manual (Page 41)

4 Copy
This section contains the following topics:
• Make copies from the control panel
• Change the copy settings
• Set the number of copies
• Set the copy paper size
• Set the copy paper type
• Change copy speed or quality
• Resize an original to fit onto letter or A4 paper
• Copy a legal-size document onto letter paper
• Adjust the lightness and darkness of your copy
• Enhance blurred areas of your copy
• Enhance light areas of your copy
• Cancel a copy job
NOTE: Many copy functions can be performed from the software. See the software
help for more information.
Make copies from the control panel
NOTE: The HP Officejet J3500 supports black and white copies on plain paper only.
You can make quality copies from the control panel.
To make a copy from the control panel
1. Make sure you have paper loaded in the input tray.
2. Load your original using the ADF. For more information, see
Load originals .
3. Do one of the following:
• Press START COPY Black to start a black-and-white copy job.
• Press START COPY Color to start a color copy job.
NOTE: If you have a color original, pressing START COPY Black produces a
black-and-white copy of the color original, while pressing START COPY Color
produces a full-color copy of the color original.
Change the copy settings
NOTE: The HP Officejet J3500 supports black and white copies on plain paper only.
You can customize the copy settings to handle nearly any task.
Copy 37