HP Officejet J5740 All-in-One Printer - Manual (Page 114)

NOTE: Handle the print cartridges carefully. Dropping or jarring cartridges can cause
temporary printing problems, or even permanent damage.
Replace the print cartridges
Follow these instructions when the ink level is low.
NOTE: When the ink level for the print cartridge is low, a message appears on the
display. You can also check the ink levels by using the HP Photosmart Studio (Mac)
Software on your computer.
NOTE: When the ink level for the print cartridge is low, a message appears on the
display. You can also check the ink levels by using the Printer Toolbox available
through the HP Solution Center Software on your computer or through the Print
Properties dialog box on your computer.
When you receive a low-ink warning message on the display, make sure you have a
replacement print cartridge available. You should also replace the print cartridges when
you see faded text or if you experience print quality issues related to the print cartridges.
To order print cartridges for the HP All-in-One, go to
www.hp.com/learn/suresupply . If
prompted, choose your country/region, follow the prompts to select your product, and
then click one of the shopping links on the page.
To replace the print cartridges
1. Make sure the HP All-in-One is on.
CAUTION: If the HP All-in-One is off when you open the print cartridge door to
access the print cartridges, the HP All-in-One will not release the cartridges for
changing. You might damage the HP All-in-One if the print cartridges are not
docked safely when you try to remove them.
2. Open the print cartridge door.
The print carriage should move to the far right side of the HP All-in-One. If the print
carriage does not move to the right side, close the door. Then, turn the HP All-in-One
off, and then on again.
Chapter 11
112 Maintain the HP All-in-One