HP Officejet J5740 All-in-One Printer - Manual (Page 273)

Regulatory notices
The HP All-in-One meets product requirements from regulatory agencies in your country/region.
• Regulatory model identification number
• Notice to users of the U.S. telephone network: FCC requirements
• FCC statement
• Note à l’attention des utilisateurs du réseau téléphonique canadien/notice to users of the
Canadian telephone network
• Notice to users in Japan
• Power cord statement
• Notice to users in the European Economic Area
• Notice to users of the German telephone network
• Geräuschemission
• Notice to users in Korea
• Australia Wired Fax Statement
Regulatory model identification number
For regulatory identification purposes, your product is assigned a Regulatory Model Number. The
Regulatory Model Number for your product is SDGOB-0701. This regulatory number should not be
confused with the marketing name HP Officejet J5700 All-in-One series.
Notice to users of the U.S. telephone network: FCC requirements
This equipment complies with FCC rules, Part 68. On this equipment is a label that contains, among
other information, the FCC Registration Number and Ringer Equivalent Number (REN) for this
equipment. If requested, provide this information to your telephone company.
An FCC compliant telephone cord and modular plug is provided with this equipment. This equipment
is designed to be connected to the telephone network or premises wiring using a compatible modular
jack which is Part 68 compliant. This equipment connects to the telephone network through the
following standard network interface jack: USOC RJ-11C.
The REN is useful to determine the quantity of devices you may connect to your telephone line and
still have all of those devices ring when your number is called. Too many devices on one line might
result in failure to ring in response to an incoming call. In most, but not all, areas the sum of the RENs
of all devices should not exceed five (5). To be certain of the number of devices you may connect
to your line, as determined by the REN, you should call your local telephone company to determine
the maximum REN for your calling area.
If this equipment causes harm to the telephone network, your telephone company may discontinue
your service temporarily. If possible, they will notify you in advance. If advance notice is not practical,
you will be notified as soon as possible. You will also be advised of your right to file a complaint with
the FCC. Your telephone company may make changes in its facilities, equipment, operations, or
procedures that could affect the proper operation of your equipment. If they do, you will be given
advance notice so you will have the opportunity to maintain uninterrupted service.
If you experience trouble with this equipment, please contact the manufacturer, or look elsewhere
in this manual, for warranty or repair information. Your telephone company may ask you to
disconnect this equipment from the network until the problem has been corrected or until you are
sure that the equipment is not malfunctioning.
This equipment may not be used on coin service provided by the telephone company. Connection
to party lines is subject to state tariffs. Contact your state public utility commission, public service
commission, or corporation commission for more information.
Regulatory notices 271