Printouts are faded or have dull colors, Solution 4: clean the print cartridge nozzles, Solution 5: clean the print cartridges – HP Deskjet F4210 All-in-One Printer User Manual

Page 103

Advertising
background image

Solution 3: If the print cartridge was dropped, wait for it to recover

Solution: Allow 30 minutes for the print cartridge to recover.
Cause: A tri-color or photo print cartridge was jarred or handled roughly during
installation.

If this did not solve the issue, try the next solution.

Solution 4: Clean the print cartridge nozzles

Solution: Check the print cartridges. If it looks as though there are fibers or dust
around the ink nozzles, clean the ink nozzle area of the print cartridge.
For more information, see:

“Clean the area around the ink nozzles” on page 72

Cause: The print cartridge nozzles needed to be cleaned.

If this did not solve the issue, try the next solution.

Solution 5: Clean the print cartridges

Solution: Check the estimated ink levels remaining in the print cartridges.

NOTE:

Ink level warnings and indicators provide estimates for planning

purposes only. When you receive a low-ink warning message, consider having a
replacement cartridge available to avoid possible printing delays. You do not need
to replace the print cartridges until print quality becomes unacceptable.

If there is ink remaining in the print cartridges, but you are still noticing a problem,
print a self-test report to determine if there is a problem with the print cartridges. If the
self-test report shows a problem, clean the print cartridges. If the problem persists,
you might need to replace the print cartridges.

For more information, see:

“Print cartridge troubleshooting” on page 88

“Print a self-test report” on page 61

Cause: The print cartridges needed to be cleaned or there was insufficient ink.

Printouts are faded or have dull colors

Try the following solutions if the colors in your printout are not as bright and intense as
you expected.

Solution 1: Check the print settings

Solution 2: Check the paper type

Solution 3: If you are making a copy, place a protective sheet on the glass

Solution 4: Clean the glass

Solution 5: Clean the print cartridges

Print quality troubleshooting

101

Trou

bles

ho

ot

ing

Advertising