Solution 2: clean the scanner glass – HP Deskjet F4210 All-in-One Printer User Manual
Page 125
Solution 1: Place the original correctly on the glass
Solution: Load your original print side down on the right front corner of the glass.
Cause: The original was placed incorrectly on the glass.
If this did not solve the issue, try the next solution.
Solution 2: Clean the scanner glass
Solution: Clean the scanner glass and make sure that there are no foreign
materials adhering to it.
For more information, see
Cause: The scanner glass was dirty, causing the product to include an area in the
copy that was larger than the document.
The printout appears enlarged on the page
Solution: Ensure that your Copy settings are chosen correctly. If the problem
persists, debris might be stuck on the glass or on the back of the document lid. This
can cause the product to detect only a portion of the image. Turn off the product,
unplug the power cord, and use a soft cloth to wipe the glass and the back of the
document lid.
For more information, see:
•
“Clean the lid backing” on page 60
•
Cause: The product detected only a portion of the image due to dust or debris on
the glass.
Copy troubleshooting
123
Trou
bles
ho
ot
ing