HP Deskjet F4210 All-in-One Printer User Manual
Page 13
Label
Icon
Name and Description
1
Check Print Cartridge lights: Indicates the need to reinsert the specified print
cartridge, replace the print cartridge, or close the print cartridge door. The
Black light indicates that the problem is with the black print cartridge, and
the Color light indicates that the problem is with the tri-color print cartridge.
2
Start Copy Black: Starts a black-and-white copy job.
NOTE:
To make copies, you must connect your product to a computer. The
computer must be on and the software installed.
3
Start Copy Color: Starts a color copy job.
NOTE:
To make copies, you must connect your product to a computer. The
computer must be on and the software installed.
4
Resume: Instructs the HP All-in-One to continue after a problem is solved.
A blinking Resume light next to the Resume button indicates the need to
load paper or clear a paper jam.
5
Cancel: Stops a print, copy, or scan job.
6
On: Turns the HP All-in-One on or off. The On button is lit when the HP All-
in-One is powered on. The light blinks while performing a job.
When the HP All-in-One is off, a minimal amount of power is still used by the
product. To completely disconnect the power supply to the HP All-in-One,
turn the product off, and then unplug the power cord.
CAUTION:
Before you unplug the power cord, you must press the On
button and allow the HP All-in-One to turn itself off. This prevents the print
cartridges from drying out.
Control panel buttons
11
HP A
ll-in-One ov
erview