HP Deskjet F4210 All-in-One Printer - Manual (Page 55)

8 Use the copy features
The HP All-in-One allows you to produce high-quality color and black-and-white copies
on a variety of paper types.
To make copies, the HP All-in-One and computer must be connected and turned on. The
HP Photosmart Software must also be installed and running on your computer prior to
copying.
NOTE: If you are using the device with a computer running Windows 2000, Windows
XP Starter Edition, or Windows XP x64, some features might not be available. For
more information, see
“Notice to Windows 2000, Windows XP x64 Edition, and
Windows XP Starter Edition users” on page 208 .
To make a copy, scan the document or image and then print it.
This section contains the following topics:
• Make a copy
• Stop copying
Make a copy
To make a copy, the HP All-in-One and computer must be connected and turned on. The
HP Photosmart Software must also be installed and running on your computer prior to
copying. To verify that the HP Photosmart Software is running on a Windows computer,
look for the HP Digital Imaging Monitor icon in the system tray at the lower right side of
the screen, near the time.
Make a copy 53
Us
e the
copy
fea
tures