HP Deskjet F4210 All-in-One Printer - Manual (Page 110)

Cause: The wrong type of envelope was loaded.
Borderless printing produces unexpected results
Try the following solutions to resolve the issue. Solutions are listed in order, with the most
likely solution first. If the first solution does not solve the problem, continue trying the
remaining solutions until the issue is resolved.
• Solution 1: Print from the HP Photosmart Software
• Solution 2: Use the appropriate media
Solution 1: Print from the HP Photosmart Software
Solution: Try printing the image from the photo imaging software that came with
the product.
Cause: Printing a borderless image from a non-HP software application produced
unexpected results.
If this did not solve the issue, try the next solution.
Solution 2: Use the appropriate media
Solution: To print a borderless image, use 10 x 15 cm (4 x 6 inch) HP Advanced
Photo Papers.
For more information, see:
“Print a borderless image” on page 38
Cause: Use of inappropriate media.
The product is not responding
Try the following solutions to resolve the issue. Solutions are listed in order, with the most
likely solution first. If the first solution does not solve the problem, continue trying the
remaining solutions until the issue is resolved.
• Solution 1: Wait for the product to finish other tasks
• Solution 2: Check for a paper jam
• Solution 3: Load more paper in the input tray
• Solution 4: Check for a print carriage stall
• Solution 5: Check the cable connections to the product
• Solution 6: Make sure that the product is turned on
• Solution 7: Restart the product
• Solution 8: Check the print driver status
• Solution 9: Check the print queue for canceled jobs
Solution 1: Wait for the product to finish other tasks
Solution: If the product is performing another task such as copying or scanning,
your print job will be delayed until the product completes the current task.
Chapter 12
108 Troubleshooting
T
roub
les
hoot
ing