Solution 2: check for a paper jam, Solution 3: load more paper in the input tray, Solution 4: check for a print carriage stall – HP Deskjet F4210 All-in-One Printer User Manual
Page 111
Some documents take a long time to print. If nothing has printed several minutes after
you sent a print job to the product, check your computer to see if there are any
messages.
Cause: The product was busy with another task.
If this did not solve the issue, try the next solution.
Solution 2: Check for a paper jam
Solution: Clear the paper jam.
For more information, see:
Cause: The product had a paper jam.
If this did not solve the issue, try the next solution.
Solution 3: Load more paper in the input tray
Solution: If the product has only a few sheets remaining, load more paper in the
input tray. If there is plenty of paper in the input tray, remove the paper, tap the stack
of paper against a flat surface, and reload the paper into the input tray.
For more information, see:
“Load full-size paper” on page 24
Cause: The product was out of paper.
If this did not solve the issue, try the next solution.
Solution 4: Check for a print carriage stall
Solution: Turn off the product. Lower the input tray, open the front access door,
and remove any objects that are blocking the print carriage (including any packing
materials), and then turn on the product.
For more information, see:
“The print carriage is stalled” on page 180
Cause: The print carriage has stalled.
Print troubleshooting
109
Trou
bles
ho
ot
ing