The margins are not printing as expected, Solution 7: check for a print carriage stall – HP Deskjet F4210 All-in-One Printer User Manual

Page 116

Advertising

Solution 7: Check for a print carriage stall

Solution: Turn off the product. Lower the input tray, open the front access door,
and remove any objects that are blocking the print carriage (including any packing
materials), and then turn on the product.

For more information, see:

“The print carriage is stalled” on page 180

Cause: The print carriage has stalled.

The pages in my document came out in the wrong order

Solution: Print the document in reverse order. When the document finishes
printing, the pages will be in correct order.
For more information, see:

“Print a multiple-page document in reverse order” on page 46

Cause: The print settings were set to print the first page of your document first.
Because of the way the paper feeds through the product, this means the first page
will be print side up at the bottom of the stack.

The margins are not printing as expected

Try the following solutions to resolve the issue. Solutions are listed in order, with the most
likely solution first. If the first solution does not solve the problem, continue trying the
remaining solutions until the issue is resolved.

•

Solution 1: Set the correct margins in your software application

•

Solution 2: Make sure that the paper size setting is correct

•

Solution 3: Check the paper guide position

•

Solution 4: Make sure the stack of envelopes is loaded correctly

Solution 1: Set the correct margins in your software application

Solution: Check the printer margins.

Chapter 12

114