HP Photosmart D7560 Printer - Manual (Page 22)

To adjust the volume
1. Touch the Setup icon.
2. Touch Preferences.
3. Touch Sound Effects Volume, and then touch the volume you want to select.
Computer connection information
The HP Photosmart comes equipped with a rear USB 2.0 High Speed port for connection
to a computer.
If you use a USB cable to connect the HP Photosmart to a computer on a network, you
can set up printer sharing on your computer. This enables other computers on the network
to print to the HP Photosmart, using your computer as the host.
The host computer (your computer, connected directly to the HP Photosmart by a USB
cable) has full software functionality. Other computers, which are referred to as the
clients, have access only to the print features. HP recommends up to 5 computers for
the best performance. You must perform other functions from the host computer or from
the control panel on the HP Photosmart.
To connect the product with the USB cable
▲ Refer to the Start Here guide that came with your product for information on
connecting to a computer with a USB cable.
NOTE: Do not connect the USB cable to the product until you are prompted to
do so.
To enable printer sharing on a Windows computer
▲ Refer to the user guide that came with your computer or see the Windows onscreen
Help.
Connect to a Bluetooth ® device
If you insert an HP Bluetooth Adapter (such as the HP bt500) into the front USB port,
you can print to the HP Photosmart from Bluetooth devices such as PDAs, camera
phones, and computers.
This section contains the following topics:
• What you need for a Bluetooth connection
• Connect the HP Photosmart to a computer using a Bluetooth® wireless connection
• Manage your Bluetooth settings
Connect to a Bluetooth ® device 19
Finish
set
up