Prepare the product for shipment, Secure the ink system, Remove the control panel faceplate – HP Photosmart D7560 Printer User Manual

Page 222

Advertising
background image

Prepare the product for shipment

If, after contacting HP support or returning to the point of purchase, you are requested to send the
HP Photosmart in for service, make sure you remove and keep the following items before returning
your product:

The control panel faceplate

The power cord, USB cable, and any other cable connected to the HP Photosmart

CAUTION:

The replacement HP Photosmart will not be shipped with a power cord. Store

the power cord in a safe place until the replacement HP Photosmart arrives.

Any paper loaded in the input tray

This section contains the following topics:

Secure the ink system

Remove the control panel faceplate

Secure the ink system

Contact HP support for information about how you should secure the ink system to prevent ink from
leaking in the HP Photosmart during shipment.
If you receive a replacement HP Photosmart, refer to the instructions included in the box for
information about how to secure the ink system. The replacement HP Photosmart might come with
ink cartridges that you can use to install in your device to prevent the ink system from leaking during
shipment.

NOTE:

This information does not apply to customers in Japan. For information on service

options in Japan, see

“HP Quick Exchange Service (Japan)” on page 218

.

Remove the control panel faceplate

Remove the control panel faceplate before returning the HP Photosmart for repair.

NOTE:

This information does not apply to customers in Japan. For information on service

options in Japan, see

“HP Quick Exchange Service (Japan)” on page 218

.

CAUTION:

The HP Photosmart must be unplugged before following these steps.

To remove the control panel faceplate

1.

Press the On button to turn off the product.

2.

Unplug the power cord, and then disconnect it from the product. Do not return the power cord
with the product.

3.

Remove the control panel faceplate as follows:
a. Place your hands on each side of the control panel faceplate.
b. Use your fingertips to pry the control panel faceplate off.

Prepare the product for shipment

219

HP wa

rranty

and

sup

port

Advertising