HP Photosmart D7560 Printer - Manual (Page 27)

Set Bluetooth security for the HP Photosmart
You can enable the product security settings through the Bluetooth menu on the
HP Photosmart. From the Bluetooth menu, you can:
• Ensure passkey authentication prior to someone printing to the HP Photosmart from
a Bluetooth device.
• Make the HP Photosmart visible or invisible to Bluetooth devices that are within range.
This section contains the following topics:
• Set the security level
• Set the HP Photosmart to be invisible to Bluetooth devices
Set the security level
You can set the security level of the HP Photosmart to either Low or High. The default
security setting is Low. Low level security does not require authentication.
• Low: does not support authentication. No passkey is required and any Bluetooth
device within range can print to the HP Photosmart. This is the default security setting.
• High: supports authentication. You will need to enter a passkey before printing to the
HP Photosmart.
NOTE: The HP Photosmart ships with a predefined passkey that is set to four zeroes
"0000".
To set the HP Photosmart to require passkey authentication
1. Touch the Setup icon.
2. Touch the down arrow to scroll through the options, and then touch Bluetooth.
3. Touch Passkey.
4. Use the visual keyboard to enter a new passkey.
NOTE: The passkey must be 1 to 4 characters long, and can only consist of
numbers.
5. When you have finished entering your passkey, touch OK.
The Bluetooth menu appears.
6. Touch Security Level.
7. Touch High.
High level security requires authentication.
Passkey authentication is now set for the HP Photosmart.
Related topics
“Enter text using the visual keyboard” on page 11
Chapter 4
24 Finish setting up the HP Photosmart
Finish set
up