HP Photosmart D7560 Printer - Manual (Page 26)

The following table describes the Bluetooth settings shown on the configuration page.
Parameter Description
Device Address The hardware address of the Bluetooth device.
Device Name The device name assigned to the product, which can identify it on a Bluetooth
device.
Passkey A value that the user must enter in order to print via Bluetooth.
Visibility Shows whether or not the HP Photosmart is visible to Bluetooth devices that
are within range.
• Visible to all: Any Bluetooth device within range can print to the
HP Photosmart.
• Not visible: Only Bluetooth devices that have stored the device address
of the HP Photosmart can print to it.
Security The level of security set for an HP Photosmart connected by Bluetooth.
• Low: The HP Photosmart does not require a passkey. Any Bluetooth
device within range can print to it.
• High: The HP Photosmart requires a passkey from the Bluetooth device
before allowing the device to send a print job.
Change the device name
Some Bluetooth products display the name of the HP Photosmart when connected. If you
do not want the default name displayed as the name of the HP Photosmart, you can
change the device name.
To change the device name of the HP Photosmart
1. Touch the Setup icon.
2. Touch the down arrow to scroll through the options, and then touch Bluetooth.
3. Touch Device Name.
NOTE: The HP Photosmart ships with the predefined name of Photosmart
D7500.
4. Use the visual keyboard to enter a new name.
5. When you have finished entering a name for the HP Photosmart, touch OK.
The name you entered will appear on your Bluetooth device when you connect to the
HP Photosmart to print.
6. Touch OK to exit the Setup menu.
Related topics
“Enter text using the visual keyboard” on page 11
Connect to a Bluetooth ® device 23
Finish
set
up