HP Photosmart D7560 Printer - Manual (Page 74)

Automatically enhance your photos
The HP Photosmart is set up, by default, to enhance your photos automatically when you
print them. When this feature is enabled, the HP Photosmart uses HP Real Life
Technologies to:
• Adjust the brightness or darkness of your photos (shown in print preview and printed
output)
• Adjust the lighting to make dark images appear brighter (shown on printed output
only)
• Sharpen blurry images (shown on printed output only)
You can turn off the automatic photo enhancement feature for individual photos, on a per-
image basis.
To turn off automatic photo enhancement
1. Touch Edit on the photo selection screen.
2. In the Edit Photo menu, touch Photo Fix.
3. Touch Off.
Related topics
“Print a photo on photo paper” on page 53
Print a frame around your photo
You can print a decorative colored border around the outside edge of your photo to frame
the photo.
NOTE: The changes you make to the photo apply only to viewing and printing the
photo. The changes will not be saved on the memory card.
To print a frame around your photo
1. Touch Edit on the photo selection screen.
2. In the Edit Photos menu, touch Add Frame.
3. Touch the left arrow or right arrow to scroll through the frames.
4. Touch the frame you want to use.
The selected frame is applied to the photo and shown by itself on the display.
Related topics
“Print a photo on photo paper” on page 53
Adjust the brightness of your photos
You can adjust the brightness of a photo so that it prints lighter or darker than the original
photo you took with your digital camera.
NOTE: The changes you make to the photo apply only to viewing and printing the
photo. The changes will not be saved on the memory card.
Edit photos using the control panel 71
Phot
os