HP StoreEver ESL G3 Tape Libraries - Manual (Page 118)

Table 24 Media usage report dialog box (continued)
Description Field
Errors in reading data where an attempt to re-read the
data was successful Recovered read errors
Errors where all re-write attempts failed and the data
could not be successfully written to the tape Unrecovered write errors
Errors where all re-read attempts failed and the data
could not be successfully read from the tape Unrecovered read errors
Cartridge Encryption Status (Unknown, Encrypted, or
Not Encrypted) Encryption
3. To e-mail, save, or print the report, click Send.
•
To indicate that you want to send the information as an e-mail message to a recipient,
select Email, and then either type an e-mail address in the Email text box or select an
existing address from the drop-down list. If appropriate, type a comment in the Comment
text box to send with the information.
•
To save the information, select Save, then either type in the Save text box a path and a
file name to which you want the information saved, or click Browse to specify a location
and a file name.
NOTE: The Save option is available to remote client users only. It appears grayed out
on the OCP.
•
To indicate that you want to send the information to a printer, select Print.
NOTE: The Print option is available to remote client users only. It appears grayed out
on the OCP.
4. Click Cancel to exit the Media Usage Report.
Monitoring sensor status
The Sensor Status dialog box displays detailed information about the library power and cooling
systems, such as operational status, temperature, voltage or wattage, and fan speed in rotations
per minute (RPM). You can perform the following procedures while viewing either the physical
library or a partition.
Accessing the sensor status dialog box
To access sensor status:
1. Log on as an administrator.
2. From the View menu, click the name of the physical library or appropriate partition.
3. Click Monitor
→Sensors.
The Sensors Status dialog box appears with the Cooling Fan tab displayed.
Displaying cooling fan information
To display detailed information about the library cooling fans:
1. Click the Cooling Fan tab on the Sensor Status dialog box.
The Sensors Status dialog box appears with the Cooling Fan tab displayed.
Table 25 (page 119) describes the elements on the Cooling Fan tab.
118 Monitoring the library