HP StoreEver ESL G3 Tape Libraries User Manual
Page 90
Figure 15 Section, column, and row numbering for rack 2 - LTO cartridges
2. I/E station
1. Column
4. Magazines not present in a control module
3. Cartridges in the I/E station are addressed by the library
as part of column 3, sections 1 through 4
5. Section
NOTE:
In
, the five magazines shown in column 4, sections 6-10 do not
exist in a control module of a single robot library. However, these magazines exist in control
modules of dual robot libraries as well as in expansion modules and high density expansion
modules in both single and dual robot libraries.
shows examples of location coordinates. These examples assume that the
linear storage is located in aisle 1, module 1, and rack 1. That is why the first three numbers in
the comma separated list are 1,1,1. The last three numbers represent the address on the linear
storage assembly.
90
Operating the library