HP StoreEver ESL G3 Tape Libraries - Manual (Page 43)

1. Use Table 5 (page 43) to assist you in completing the elements on the IPv4 Network
Configuration dialog box.
Table 5 IPv4 Network Configuration Information
Description Element
In the Host Settings area:
If Dynamic Host Configuration Protocol (DHCP) is
enabled on your network, select Enable to have DHCP DHCP
automatically configure the library network settings.
Enable makes the IP Address, Subnet Mask, and Default
Gateway text boxes unavailable. Select Disable to make
the IP Address, Subnet Mask, and Default Gateway text
boxes available for you to manually set the library
network settings.
The network name that you want to assign to the library. Library Name
The IP address of the library. This text box is available
only if DHCP is disabled. IP Address
The subnet mask. This text box is available only if DHCP
is disabled. Subnet Mask
The IP address of the default gateway for your portion
of the Ethernet network. This text box is available only
if DHCP is disabled. Default Gateway
Enabling or disabling IPv6 and IPv4 network configuration 43