HP StoreEver ESL G3 Tape Libraries - Manual (Page 39)

NOTE: If the physical library is not offline, you receive a message that asks you whether
you want to take the library offline and delete the partition. Click Yes.
6. The library deletes the selected partition. Repeat the process to delete another partition, or
click Close.
Selecting a partition control path
To select a partition and configure the control path, perform the following steps:
1. Log on as an administrator.
2. From the main console, select Setup
→Partitions→Control Path.
The Secure Manager Partitions dialog box appears.
3. Highlight the partition you want to configure, and click OK.
The Control Path dialog box appears.
4. Select the drive you want to configure as the control path.
The primary Control Path Drive you selected is highlighted in yellow, and the Enable Control
Path box is selected automatically.
5. Click OK to finish.
Working with partitions 39