HP StoreEver ESL G3 Tape Libraries User Manual
Page 197
describes the elements on the Details tab.
Table 38 Event Details window, Details tab
Description
Element
In the Event # area:
The current state of the event. Possible states are:
State
• Open: indicates that an issue that requires attention
occurred in the library, whether a problem or a
warning condition.
• Closed: indicates that a user closed the issue.
• Verified: indicates that the library has successful
operational results or positive data that verifies that
the problem is resolved.
The date and time on which the library created the
report.
Posted
The subsystem that caused the event. Possible subsystems
are:
Status Group
• Connectivity
• Drives
• Control
• Power
• Cooling
• Robotics
If the event is closed, the date and time on which it was
closed.
Closed
The severity level that is associated with the status group
(subsystem). Possible levels are:
Severity
• 1 (Failed)
• 2 (Degraded)
• 3 (Warning)
• 5 (Good)
The number of times that the library reopened the event.
If an event is in the Closed or Verified state and the
Duplicates
identical problem occurs again within 30 minutes, the
library reopens the event and increments the event's
duplicate count. If the library has not reopened the
event, the value is zero (0).
Events that are in the Closed or Verified state for more
than 30 minutes cannot be reopened. In this case, if the
identical problem occurs again, the library creates a
new event.
The serial number of the particular FRU.
FRU SN
The name of the repair page that is associated with the
report.
Repair Link
The status of the FRU. Possible statuses are:
FRU Status
• Failed
• Degraded
• Warning
• Good
Viewing event details
197