HP StoreEver ESL G3 Tape Libraries - Manual (Page 142)

See “Verification test functions” (page 142) for more specific information about each sub-test.
Verification test functions
To run tests and review results, use the Verification Tests window, shown in Figure 19 (page 142) .
To display the window, select Tools
→Library Diagnostics→Verification Tests.
Figure 19 Verification tests window
Library alignment test
The library alignment test performs the following tasks:
•
Performs accessor X-axis and Y-axis travel test (also calls the FRU accessor assembly test)
•
Calibrates library and checks calibration offsets by comparing them to the default values for
the drives and I/E stations
•
Checks magazine offsets
•
Checks collected offset alignments for magazines, I/E stations, and drive sleds
•
Checks joint alignment quality
142 Maintaining the library