HP StoreEver ESL G3 Tape Libraries - Manual (Page 196)

By default, this window is set to Opened for state, All for severity level, and All for subsystems.
NOTE: Events that the library has automatically verified and closed are in the Verified state.
Events that users have manually closed are in the Closed state.
3. Select the appropriate check boxes in the Select State, Select Severity, and Select Sub-system
areas, and then click OK.
For descriptions of elements on the Event List window, see “Using system status buttons to
display event lists” (page 194) .
4. By default, the event list is sorted by event ID in ascending order with the oldest event at the
top and the newest one at the bottom. To change the sorting (for example, by state or severity),
click the column heading by which you want to sort the events. Repeatedly clicking a column
heading toggles between ascending and descending order.
Viewing event details
Events provide detailed information about the event itself, the reports that are associated with it,
and a repair page that gives guidance for resolving the issue. These events provide important
information about library conditions from which the issue emerged and helpful information for
resolving it.
To display the detailed information for a particular event, perform the following steps:
1. In the Select Event area of the Event List window , select the appropriate event row.
2. Click Details.
The Event # area of Event Details displays information about the event. The FRU History Event
List area lists all events that were opened in the past and that see the same specific FRU (based
on the location of the FRU in the library) as the one reported by this event.
196 Troubleshooting your library