Cooktop controls, Electronic ignition & automatic reignition, Dual-flame stacked burners – GE ZGP304LRSS User Manual

Page 10

Advertising
background image

10

Cooktop Controls

Professional All-Gas Range

Push the control knob in and turn it
counterclockwise to the /,7( position.

$IWHUWKHEXUQHULJQLWHVturn the knob to adjust

the flame size.

7RWXUQDEXUQHURII turn the knob clockwise,

as far as it will go, to the OFF position.

• Do not operate a burner for an extended

period of time without cookware on the grate.
The finish on the grate may chip without
cookware to absorb the heat.

• The indicator light on each bezel verifies the

burner is on. However, it should not be a
substitute for visually checking the flame at
the burner.

Electronic

ignition &

automatic

reignition

The range is equipped with electronic ignition
which eliminates the need for a standing pilot
light.

The burners on this range will automatically
relight if the flame goes out.

All surface burner igniters will spark and make
clicking sounds when any burner is turned on.
Do not touch any of the burners when igniters
are clicking.

Occasionally the burners may spark if excess
wind or a draft blows the flame away from the
burner’s flame sensor.

The griddle and IR (infrared) grill are equipped
with Glo-Bar igniters. The Glo-Bar remains
energized whenever the griddle or IR grill is in
use to ensure the burner always stays lit.

,QFDVHRIDSRZHURXWDJH you can light the

surface burners on your cooktop with a match.
Hold a lighted match to the burner, then turn
the knob to the LOW position. 8VHH[WUHPH
FDXWLRQZKHQOLJKWLQJEXUQHUVWKLVZD\

Do not attempt to light the grill or griddle during
a power outage. The gas to these burners will
automatically shut off during a power outage.

To light

a surface

burner

ON Indicator

Light

Dual-flame

stacked

burners

All surface burners on your range have two sets

of flames stacked one on top of the other; the

dual-flame burners have a lower (simmer) flame

and a upper (main) flame.
When a burner is turned on, the lower flame

will always light and stay on.

6LPPHULQJ

The stacked burner design provides a wide

range of heat settings with which to simmer.

Depending on the type and quantity of food,

and pan size, the flame can be adjusted to suit

your specific need. The lowest setting uses only

the lower flame and can maintain delicate foods

at a safe 140°F.

&RRNLQJ

Settings from /2 to ;+,will use both upper

and lower flames. Use /2 to +, for all purpose

cooking. Use +, or ;+, (highest setting) with

larger diameter cookware.

Upper

Flame

Lower Flame

Lower

Flame

;+,and +, are very high heat settings and

are intended to sear foods quickly and boil
large quantities of water.

Advertising