Boonton 4530 Peak Power Meter User Manual User Manual
Page 123
4-49
Boonton Electronics
Chapter 4
4530 Series RF Power Meter
Remote Operation
SYSTem:LIGHT
Description:
Set or return the display backlight status. OFF = always off, ON = always on, ON_1 and
ON_5 = on at any key press, off after 1 or 5 minutes of keyboard inactivity,
Syntax:
SYSTem:LIGHT <asc>
Argument:
<asc> = ON, OFF, ON_1, ON_5
Valid Modes:
Any
SYSTem:COMMunicate:SERial:BAUD
Description:
Set or return the serial port baud rate.
Syntax:
SYSTem:COMMunicate:SERial:BAUD <n>
Argument:
<n> = 1200, 2400, 4800, 9600, 19200, 38400
Valid Modes:
Any
SYSTem:COMMunicate:SERial:BITS
Description:
Set or return the number of serial port data bits.
Syntax:
SYSTem:COMMunicate:SERial:BITS <n>
Argument:
<n> = 7 or 8
Valid Modes:
Any
SYSTem:COMMunicate:SERial:SBITs
Description:
Set or return the number of serial port stop bits.
Syntax:
SYSTem:COMMunicate:SERial:SBITs <n>
Argument:
<n> = 1 or 2
Valid Modes:
Any
SYSTem:COMMunicate:SERial:PARity
Description:
Set or return the serial port parity status to NONE, ODD or EVEN.
Syntax:
SYSTem:COMMunicate:SERial:PARity <asc>
Argument:
<asc> = NONE, ODD, EVEN
Valid Modes:
Any
SYSTem:COMMunicate:SERial:CONTrol:RTS
Description:
Set or return the serial port handshake mode for the RTS line. ON = use as handshake line,
OFF = always deassert. The DTR line is always asserted.
Syntax:
SYSTem:COMMunicate:SERial:CONTrol:RTS <asc>
Argument:
<asc> = OFF, ON
Valid Modes:
Any