Boonton 4530 Peak Power Meter User Manual - Manual (Page 13)

xi
Boonton Electronics Contents
4530 Series RF Power Meter
Repair Policy
Model 4531 / 4532 Instrument. If the Boonton Model 4531/4532 RF Power Meter is not operating correctly and
requires service, contact the Boonton Electronics Service Department for return authorization. You will be provided
with an RMA number and shipping instructions. Customers outside the USA should contact the authorized Boonton
distributor for your area. The entire instrument must be returned in its original packing container. If the original
container is not available, Boonton Electronics will ship a replacement container and you will be billed for the container
cost and shipping charges.
Boonton Peak Power Sensors. Damaged or defective peak power sensors are repaired as separate accessories.
Note that sensors which have failed due to overloading, improper mating, or connecting to an out-of-tolerance connec-
tor are not considered defective and will not be covered by the Boonton Warranty. If repair is needed, contact the
Boonton Electronics Service Department for return authorization. You will be provided with an RMA number and
shipping instructions. Customers outside the USA should contact the authorized Boonton distributor for your area.
Only the defective sensor should be returned to Boonton, not the entire instrument. The sensor must be returned in its
original packing container. If the original container is not available, Boonton Electronics will ship a replacement
container and you will be billed for the container cost and shipping charges. If a new sensor is ordered, note that it
does not include a sensor cable - this item must be ordered separately.
arranty
.
Contacting Boonton. Customers in the United States having questions or equipment problems may contact
Boonton Electronics directly during business hours (8 AM to 5 PM Eastern) by phoning (973) 386-9696. FAX mes-
sages may be sent at any time to (973) 386-9191. Email inquiries should be sent to [email protected].
International customers should contact their authorized Boonton Electronics representative for assistance. A current
list of authorized US and international representatives is available on the Boonton website at www.boonton.com.
Limited Warranty
Boonton Electronics warrants its products to the original Purchaser to be free from defects in material and workman-
ship and to operate within applicable specifications for a period of one year from date of shipment for instruments,
probes, power sensors and accessories. Boonton Electronics further warrants that its instruments will perform within
all current specifications under normal use and service for one year from date of shipment. These warranties do not
cover active devices that have given normal service, sealed assemblies which have been opened, or any item which has
been repaired or altered without Boonton’s authorization.
Boonton’s warranties are limited to either the repair or replacement, at Boonton’s option, of any product found to be
defective under the terms of these warranties.
There will be no charge for parts and labor during the warranty period. The Purchaser shall prepay inbound shipping
charges to Boonton or its designated service facility and shall return the product in its original or an equivalent
shipping container. Boonton or its designated service facility shall pay shipping charges to return the product to the
Purchaser for domestic shipping addresses. For addresses outside the United States, the Purchaser is responsible for
prepaying all shipping charges, duties and taxes (both inbound and outbound).
THE FOREGOING WARRANTIES ARE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUD-
ING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PAR-
TICULAR PURPOSE. Boonton will not be liable for any incidental damages or for any consequential damages, as
defined in Section 2-715 of the Uniform Commercial Code, in connection with products covered by the foregoing
warranties.