JKS 8100 User Manual

Installation instructions, Welcome, Important

Advertising
background image

JKS8100

JKS 1" Budget Motor Mount Installation

Page 1

INSTALLATION

INSTRUCTIONS

Product: 1" Budget Motor Mounts
Part Number: JKS8100

Applications: Wrangler TJ, 1997+ 4.0L, 2.5L, 2.4L ONLY

Wrangler YJ, 1987-95 4.2L, 4.0L, 2.5L ONLY

Welcome

CONGRATULATIONS on purchasing Budget Motor

Mounts from JKS Manufacturing. We are committed

to providing you with the best products available and

your satisfaction is our first priority.
PLEASE READ these Installation Instructions careful-

ly, and save them for future reference, as they contain

important installation and maintenance information.

Important

MUST BE INSTALLED one side at a time.
MUST BE INSTALLED in conjunction with,
or following, the installation of a body lift.
OE MOTOR MOUNT BUSHINGS must be in good

condition. If worn or questionable, new motor mounts

must be installed.

Tools Required



Metric/Standard Socket Wrench Set



15mm and 18mm Open End Wrenches



Torque Wrench



Pliers or Vice Grips



Hydraulic Floor Jack



Wire Brush and/or Chemical Cleaner (to clean

bolt threads)



Die Grinder with Cut-Off Wheel or similar cutting tool

(for cutting OE insulator stud)



Anti-Seize Lubricant



Factory Service Manual (recommended)

* Asterisk denotes tools that are not required for some applica-

tions. Thoroughly read instructions first to determine which tools

will be required for your application.

Parts

Description

Part #

QTY

A

Motor Mount Spacer

03084

2

B

Bolt Extension

03085

2

C

M10 x 60mm Bolt

40700

2

D

M10 Split Washer

40253

2

E

M10 Flat Washer

40223

2

Installation

‰

1. SUPPORT ENGINE



Place a hydraulic jack beneath vehicle and choose

one of the following locations as a lifting point for

engine:



Position jack beneath transmission bell housing

with block of wood to distribute engine weight.

– or –



Position jack beneath mounting flange of engine

oil pan with block of wood to distribute weight

across oil pan bolts.

IMPORTANT: Do NOT attempt to lift the engine by the

engine oil pan.

517-278-1226 • [email protected] • www.jksmfg.com

491 W. Garfield Avenue, Coldwater, MI 49036

Advertising