JKS 9604 - Manual

JKS 9604 JKS Bar Pin Eliminator Installation Page 1
INSTALLATION
INSTRUCTIONS
Product: Bar Pin Eliminators™
Part Number: JKS9604
Welcome
CONGRATULATIONS on purchasing new Bar Pin
Eliminators from JKS Manufacturing. We are commit-
ted to providing you with the best products available
and your satisfaction is our first priority.
PLEASE READ these Installation Instructions careful-
ly, and save them for future reference, as they contain
important installation and maintenance information.
Important
NOT COMPATIBLE WITH Old Man Emu™ shock
absorbers.
INSTALLATION OF BAR PIN ELIMINATORS effec-
tively reduces the static length of shock absorber
by 0.40”.
Tools Required
 Metric/Standard Socket Wrench Set
 6mm or 1/4” Allen Head Socket with Long Extension
 Torque Wrench
 Wheel Bearing Grease
 Bench Vice or C-Clamp
 Hammer and Punch *
 Sanding or Grinding Wheel *
 Factory Service Manual (recommended)
* Asterisk denotes tools that are not required for some applica-
tions. Thoroughly read instructions first to determine which tools
will be required for your application.
Parts
Description Part # QTY
A Cross Pin / Block Combo 03075 2
B Mounting Block 03074 2
C 1/8” Roll Pin 64083 2
D M8 x 50mm Cap Bolt 39593 4
E 5/16” x 2” Cap Bolt 23261 4
F Split Washer 33620 4
Installation
‰ 1. REMOVE SHOCK ABSORBERS
 Remove the rear shock absorbers per factory ser-
vice manual instructions for your vehicle.
 Remove the factory bar pin from the upper shock
absorber bushing. HINT: A hammer and punch
may be useful for removing bar pin.
517-278-1226 • [email protected] • www.jksmfg.com
491 W. Garfield Avenue, Coldwater, MI 49036