JKS OGS161 - Manual

JKSOGS161 JKS Front Trackbar Brace Installation Page 1
INSTALLATION
INSTRUCTIONS
Product: Front Trackbar Brace
Part Number: JKSOGS161
Applications: Jeep Wrangler JK, 2007+ (front)
Welcome
CONGRATULATIONS on purchasing a new Front Trackbar
Brace from JKS Manufacturing. We are committed to
providing you with the best products available and your
satisfaction is our first priority.
PLEASE READ these Installation Instructions carefully,
and save them for future reference, as they contain impor-
tant installation and maintenance information.
Important
INSTALLATION REQUIRES WELDING by a qualified
welder or metal fabricator.
JKS ADJUSTABLE TRACKBAR IS REQUIRED if exist-
ing track bar interferes with steering damper.
Tools Required
 Hydraulic Floor Jack & Jack Stands
 Metric/Standard Socket Wrench Set
 Black Felt Tip Marker (or equivalent)
 Torque Wrench
 Die Grinder with Sanding Wheel
(or equivalent tool for removing paint)
 Welding Equipment
 Weldable Corrosion Resistant Coating,
 3M® PN 05917 (or equivalent)
 Satin Black Spray Paint
 Anti-Seize Lubricant *
 Factory Service Manual (recommended)
* Asterisk denotes tools that are not required for some applica-
tions. Thoroughly read instructions first to determine which tools
will be required for your application.
Parts
Description Part# QTY
A Front Trackbar Brace 03030 1
B Steel Sleeve 123 1
C M14 x 80mm Bolt 11113290 2
D 9/16 SAE Washer W96S 3
E M14 Nylock Nut 11129042 1
F Stabilizer Stud 103031 1
G 7/16” Fender Washer 33010 1
H 7/16” Locking Nut 37306 1
I 5/8” Poly Bushing 2611 1
517-278-1226 • [email protected] • www.jksmfg.com
491 W. Garfield Avenue, Coldwater, MI 49036