JKS 9608 - Manual

JKS9608 JKS Bar Pin Adapter Installation Page 1
INSTALLATION
INSTRUCTIONS
Product: Bar Pin Adapters
Part Number: JKS9608
Applications: Wrangler JK, 2007+ (front only)
Wrangler TJ, 1997-06 (front or rear)
Grand Cherokee ZJ, 1993-98 (front only)
Welcome
CONGRATULATIONS on purchasing new Bar Pin Adapt-
ers from JKS Manufacturing. We are committed to provid-
ing you with the best products available and your satisfac-
tion is our first priority.
PLEASE READ these Installation Instructions carefully,
and save them for future reference, as they contain impor-
tant installation and maintenance information.
Important
COMPATIBLE WITH Racing Shocks using 1/2" ID
spherical bearings.
INSTALLATION OF BAR PIN ADAPTERS effectively
reduces the static length of shock absorber by 0.40”
Tools Required
 Metric/Standard Socket Wrench Set
 Torque Wrench
 Bench Vice or C-Clamp
 Hammer and Punch *
 Sanding or Grinding Wheel *
 Factory Service Manual (recommended)
* Asterisk denotes tools that are not required for some applica-
tions. Thoroughly read instructions first to determine which tools
will be required for your application.
Parts
Description Part # QTY
A Cross Pin / Block Combo 03083 2
B Mounting Block 03082 2
C 1/8” Roll Pin 64083 2
D M10 x 50mm Hex Bolt 40698 4
E Split Washer 40253 4
F Composite Cone 03080 2
G 1/8” Spacers 03081 2
517-278-1226 • [email protected] • www.jksmfg.com
491 W. Garfield Avenue, Coldwater, MI 49036