JKS 9605 - Manual

JKS9605 JKS Shock Adapter Installation Page 1
INSTALLATION
INSTRUCTIONS
Product: Shock Adapter
Part Number: JKS9605
Welcome
CONGRATULATIONS on purchasing new Shock Adapters
from JKS Manufacturing. We are committed to providing
you with the best products available and your satisfaction
is our first priority.
PLEASE READ these Installation Instructions carefully,
and save them for future reference, as they contain impor-
tant installation and maintenance information
Important
COMPATIBLE WITH racing shocks using
1/2” ID spherical bearings.
MUST BE INSTALLED with 1/2” Bolt (C) facing front of
vehicle.
INSTALLATION OF SHOCK ADAPTER effectively re-
duces static length of shock absorber by 1.10”.
SHOCK ADAPTERS ARE MANUFACTURED to mount-
ing specifications recommended by most racing shock
manufacturers. Slight movement between bearing and
Shock Adapter is normal due to spherical bearing vari-
ances, but fitment between Conical Spacers (E) should
be tight.
Tools Required
 Metric/Standard Socket Wrench Set
 Torque Wrench
 Bench Vice
 Factory Service Manual (recommended)
* Asterisk denotes tools that are not required for some applica-
tions. Thoroughly read instructions first to determine which tools
will be required for your application.
Parts
Description Part # QTY
A Shock Adapter PN 960501 2
B M20 Nylock Nut PN 40187 2
C 1/2” x 2-1/4” Bolt PN 13212 2
D 1/2” Ovalok Nut PN 37268 2
E Conical Spacers PN 960502 4
517-278-1226 • [email protected] • www.jksmfg.com
491 W. Garfield Avenue, Coldwater, MI 49036