JKS 2200 - Manual

JKS2200 JKS Adjustable Coil Spacer Installation Page 1
INSTALLATION
INSTRUCTIONS
Product: Adjustable Coil Spacer (ACOS™)
Part Number: JKS2200
Welcome
CONGRATULATIONS on your purchase of a new
JKS ACOS™ system! At JKS Manufacturing, we are
committed to providing you with the best products
available and your satisfaction is our first priority.
PLEASE READ these Installation Instructions careful-
ly, and save them for future reference, as they contain
important installation and maintenance information.
Important
MOST VEHICLES REQUIRE additional parts or
modifications to accommodate the immediate
increase in ride height provided by the ACOS
system.
DO NOT EXCEED maximum range of adjustment
– see illustration on page 3.
Tools Required
 Metric/Standard Socket Wrench Set
 8mm and 5/16” Allen Wrenches
 Tape Measure
 Spray Lubricant (WD-40 or similar)
 Anti-Seize Lubricant
 Hydraulic Floor Jack
 Coil Spring Compressor *
 Die Grinder with Cut-Off Wheel (or Reciprocating Saw)
and Grinding Wheel *
 10mm x 1.5p Tap *
 Satin Black Spray Paint *
 Factory Service Manual (recommended)
* Asterisk denotes tools that are not required for some applica-
tions. Thoroughly read instructions first to determine which tools
will be required for your application.
Parts
Description QTY
A Transfer Ring 2
B Adjuster Ring 2
C Threaded Tube (gold) 2
D Isolator Pad 2
E Bump Stop Support 2
F Bump Stop 2
G 10mm x 55mm Cap Bolt 2
517-278-1226 • [email protected] • www.jksmfg.com
491 W. Garfield Avenue, Coldwater, MI 49036